Description
CarPro ClearCut Compound
CarPro ClearCut Compound
CARPRO ClearCut is the compound you reach for BEFORE your finishing polish, such as Reflect! CARPRO ClearCut was developed to QUICKLY remove defects whilst allowing you to easily view your work through the polish.
CARPRO ClearCut is an extremely fast acting liquid abrasive built from the ground up for efficiency, performance, and speed! ClearCut doesn’t fool you by swelling the paint or hiding water spots and scratches just to see them re-surface later! With NO fillers ClearCut wipes off fully and a simple Eraser wipe down EASILY removes any lubricants.
CARPRO ClearCut has its own method of application for optimal results… reversing the traditional “heavy to light” method, we start with lighter pressure and finish heavy!
Type of Product: ClearCut Compound
STEPS OF USE:
- Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product.
- Spread product across section.
- Raise speed to HIGH speed with LOW pressure.
- Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass.
- Increase pressure with each pass, finishing down with heavier pressure.
- When scratches are gone or polish has been worked through, wipe clean with microfiber towel.
- Clean pad.
- Move to next section -> Apply 6 – 8 pea size drops to pad and repeat steps 2-7.
Tips:
- If needed, follow with CARPRO Reflect, or Scholl Concepts S30.
- If coating the vehicle with CQUARTZ, we recommend CARPRO Reflect Finishing Polish for finishing
FAQ’s
Contact Us
