Description
CQuartz Lite 150ml
CQuartz Lite
CQUARTZ Lite was designed for those that are not ready to make the plunge into the industry leading strength of our professional grade coatings but wish to enjoy some of the many benefits that only CQUARTZ coatings offer.
The capabilities of CQUARTZ Lite include: easier to clean surfaces, resistance to insect splatter, petrol spills, light solvents, and UV rays, whilst providing a beading contact angle of 110 Deg! In other words, CQUARTZ Lite helps keep your paint super glossy, well protected, beads like crazy, and washes off easy when properly maintained!
CQUARTZ Lite is built on a combination of Sio2 and Tio2 particles with over 45% solid materials, as well as proprietary ingredients not made public outside of the lab!
CQUARTZ Lite may be applied to virtually any exterior surface of your car including paintwork, plastics, wheels, and glass (except windscreen), just like your other favorite CQUARTZ products!
Type of Product: Ceramic Coating
STEPS OF USE:
- Make sure the surface is clean and full decontaminated. Use CARPRO Iron X, Tar X, and Sunos Ultra Fine Detailing Clay the surface to ensure all contamination is removed.
- Use CARPRO Eraser (or similar) to remove oils before application. Make sure surface is cool and dry. You may wish to polish the surface with CARPRO Essence or Reflect to create higher gloss before using Eraser or to ensure maximum durability.
- Apply 10-12 drops on a microfiber applicator; apply the product evenly to one small area of roughly 24×24”/60cm x 60cm with complete coverage and an even layer.
- Use a CARPRO 2Face Towel to remove any excess. CQUARTZ Lite does not need to be left to cure on the surface so it should be removed immediately. Check well with an appropriate light source to ensure you remove any high spots (excess product that was not leveled) or residue. Note: For a short period of time after application, high spots that were not removed immediately can be corrected by applying more CQUARTZ Lite on that area and wiping off immediately.
- After the paint is free of residue, leave to dry for 4 hours prior to getting wet. Any water drops during first 48h should be removed before drying to prevent water spotting. We also recommend the use of CARPRO Reload 1 hour after application to protect from water spots during first 48h.
FAQ’s
Contact Us
